Informational Documents

案例研究:仿真预测与实际情况
压力和温度对零件质量与尺寸的影响
Tolerances Shrinkage and Process Strategies
How Second Stage Speed Influences Your Process
How to Become a Plastics Guru: What You Need to Know (Part 3 of 3)
How to Become a Plastics Guru: What You Need to Know (Part 2 of 3)
How to Become a Plastics Guru: What You Need to Know (Part 1 of 3)
Validating part process instead of machine process could save medical molders millions
‘Part Process’ Development and Validation for Multiple Machines
Four Questions to Ask When the Mold Will Not Fill
Injection Molding Cooling Time: A Breakdown
A Team Approach to Product Development
Cavity Pressure Selection Options and Solutions
How to Manage Pressure Loss in Injection Molding
Clamp Tonnage: More is Better, Right?
Have a Molding Problem? The Answer Might Be Viscocity!
Part Design Considerations for Manufacturability Optimization
Right Mold, Right Machine
Establishing a Fill Only Part Sometimes easier said than done.
Comparing Cavity Pressure Sensor Technologies Using In-Mold Data
The RJG eDART System™ a true breakthrough in the science of injection molding data acquisition.
“Pressure Sensors: The Nerve System of the Molding Process”
Sequential Valve Gate Control, a New Opportunity for Productivity
Location Independent PPAP Streamlined Global Manufacturing, University of Michigan Automotive Conference August 2000
A Comparison of Velocity to Pressure Transfer Control Strategies for Injection Molding
The Use of In-Cavity Data for LSR Applications
Static Pins for Cavity Pressure Applications
The Two Causes of Flash
Short Shots: What’s the Deal?
Stop Punching Your Molds in the Face! A Quick Review on Setting Tonnage
4 variables, 7 Questions. How to determine what changed in your process

Plastics Technology Magazine

INJECTION MOLDING: Gate Freeze Study: Danger in a Name?

Plastics Today

A colder injection mold doesn’t always result in colder part temperatures

Injection Molding Magazine Articles

The Promise and Practice of Valve Gate Sequencing
The fundamentals of DECOUPLED MOLDING® (June 2005 Almanac)
Plantwide Process Monitoring Promotes Precision, Productivity
Plant Tour: Newly Expanded, this medical molder is poised for more growth

Asian Plastics News Articles

Ready-To-Go Molds with Cavity Pressure part 1 of 2 (November 2005)
Ready-To-Go Molds with Cavity Pressure part 2 of 2 (December 2005)
Cavity Pressure Control (January/February 2006)
Utilizing In-Cavity Pressure Data (March 2006)
Containment of Abnormal Parts Using Cavity Pressure (April 2006)
Troubleshooting Processes Using Cavity Pressure Sensors (May 2006)

MoldMaking Technology Articles

Designing Injection Molds to Meet Validation Requirements Without Rework
TZERO™: Design Optimization
Adding Value to Your Mold (By Rodney Groleau, RJG, Inc. and Robert Vaughan)
Ready-To-Go Molds (By Rodney Groleau, RJG Inc.)
Why Cavity Pressure Sensing is So Important (July/August 2005)
Understanding Cavity Pressure Technology and Use (September 2005)
Proper Installation of Cavity Pressure Sensors (October 2005)
Rigorous Mold Tryout: Do Your Homework (By Gary Chastain, RJG, Inc.)
Is the Part Design Good? (By Gary Chastain, RJG, Inc.)
Designing the Mold: The Foundation for Success (By Gary Chastain, RJG, Inc.)
Achieving Cavity Balance: Another Factor for Success (By Gary Chastain, RJG, Inc.)
Multi-Process Disease In Hot Runner Molds (By Rodney Groleau, RJG Inc.)
Valve Gate Sequencing Strategies, Part I (By Gary Chastain, RJG, Inc.)
Valve Gate Sequencing Strategies, Part II (By Gary Chastain, RJG, Inc.)
Has the Molding Machine Been Tested? (By Gary Chastain, RJG, Inc.)
Understanding the Effect of Pressure in the Cavity (By Gary Chastain, RJG, Inc.)
Setting Up a Robust Process Forever (By Gary Chastain, RJG, Inc.)
The Evolution of Process Training for Mold Builders (By Shane Vandekerkhof, RJG, Inc.)

Tooling Product News Articles

The Evolution of Today’s Mold Builder (By Rod Groleau & Patricia Hirst, RJG Inc.)

Medical

Revalidation Using Machine Independent Data